SYNTHESIS OF THE TURNING ANGLE IDENTIFIER ROTOR IN VECTOR CONTROL SYSTEM ASYNCHRONOUS ELECTRIC DRIVE

Authors

  • O. Klyuyev Dniprovsky State Technical University
  • V. Logvinova Dniprovsky State Technical University

DOI:

https://doi.org/10.31618/ESSA.2782-1994.2022.1.77.229

Keywords:

Dual feed machine, coordinate transformations, trigonometric functions of rotation angle, vector control, asymptotic stability.

Abstract

The paper for a dual-feed machine, new equations of the mathematical model of the identifier of the rotor position angle are obtained, which can be used in the synthesis of vector control systems for asynchronous gate cascade. An analysis of the stability of the developed identifier was carried out, the results of which were used in the synthesis of the identifier structure, which expands the range of its operation modes. 

Author Biographies

O. Klyuyev , Dniprovsky State Technical University

кандидат технических наук, доцент кафедры   электротехники и электромеханики

V. Logvinova , Dniprovsky State Technical University

бакалавр кафедры электротехники и электромеханики

References

Botvinnik M.M., Shakarjan Ju.G. Upravljaemaja mashina peremennogo toka, M.: Nauka, 1969, 140s.

Downloads

Published

2022-02-17

Issue

Vol. 1 No. 01(77) (2022)

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.